Spay/Neuter Magnets

Show you support spaying and neutering with our specially designed magnets. Order your magnet today!

If you have a newer model vehicle, be sure you are able to place a magnet in your desired location (use a refrigerator magnet or something similar). Some newer vehicles have no metal or low amounts of metal, so magnets will not stick to them. 

Magnets are high quality UV protected printed vinyl backed with thick .30 mil magnetic material. The ribbon is 4” x 8” and the paw print is 6” x 6”.

Caring for Your Magnet and Vehicle
Clean surface of vehicle and magnet with mild detergent before applying. Remove and clean magnet and vehicle surface often. Do not use on horizontal surfaces exposed to direct sunlight (such as automobile hoods). Do not use in temperatures exceeding 150 degrees. Before putting on metal surface be sure all paints, clear coats and waxes are cured (approximate curing times: paint 90 days, clear coat 60 days, wax 2 days). Remove magnet by lifting entire magnet from the surface. Do not pull or stretch the magnet across the surface.

Remove magnet before going through automatic car washes. The high pressure of the water may remove magnets from vehicles.